YUHONG HOLDING GROUP CO., LTD
YUHONG HOLDING GROUP CO., LTD
Add to Cart
ASTM A234 WP11-S 180 Degree U Bend For High Temperature and Pressure Application
A 180-degree U-bend is a pipe fitting that curves back on itself in a semi-circular or U-shaped pattern, changing the flow direction by 180 degrees. It is commonly used in piping systems where space constraints or thermal expansion management require a tight directional reversal.
Key Features of a 180° U-Bend:
1. Shape & Geometry
-Forms a complete half-circle (U-shape).
-Bend Radius (R): Specified as a multiple of the pipe diameter (e.g., 1.5D, 2D, 3D, where D = pipe diameter).
Example: A 2D bend on a 6-inch pipe has a 12-inch centerline radius.
2. Types of U-Bends
-Short Radius (1D): Tightest bend, used where space is limited.
-Long Radius (1.5D or more): Smoother flow, less pressure drop.
-Custom Radii: Engineered for specific applications.
3. Manufacturing Methods
-Hot Induction Bending: Heated and bent for thick-walled pipes.
-Cold Bending: Used for smaller pipes with thinner walls.
-Mandrel Bending: Ensures smooth interior without wrinkles.
4. Materials
-Carbon steel (e.g., ASTM A234 WPB)
-Alloy steel (e.g., ASTM A234 WP11, WP22)
-Stainless steel (e.g., ASTM A403 WP316)
-Nickel alloys (e.g., Inconel, Monel)
5. End Connections
-Plain Ends (PE): For welding.
-Beveled Ends (BE): Prepared for butt welding.
-Threaded Ends (TE): For screw connections.
Why Use a 180° U-Bend Instead of Two 90° Bends?
ASTM A234 WP11 Chemical Composition (%)
| Element | WP11 Class 1 | WP11 Class 2 | WP11 Class 3 |
| Carbon (C) | 0.05–0.15 | 0.05–0.20 | 0.05–0.20 |
| Manganese (Mn) | 0.30–0.60 | 0.30–0.80 | 0.30–0.80 |
| Phosphorus (P) | ≤ 0.030 | ≤ 0.030 | ≤ 0.030 |
| Sulfur (S) | ≤ 0.030 | ≤ 0.030 | ≤ 0.030 |
| Silicon (Si) | 0.50–1.00 | 0.50–1.00 | 0.50–1.00 |
| Chromium (Cr) | 1.00–1.50 | 1.00–1.50 | 1.00–1.50 |
| Molybdenum (Mo) | 0.44–0.65 | 0.44–0.65 | 0.44–0.65 |
| Nickel (Ni) | ≤ 0.50 | ≤ 0.50 | ≤ 0.50 |
| Vanadium (V) | - | - | ≤ 0.03 |
| Columbium (Cb) | - | - | ≤ 0.08 |
ASTM A234 WP11 Mechanical Properties
| Property | WP11 Class 1 | WP11 Class 2 | WP11 Class 3 |
| Tensile Strength (MPa) | ≥ 415 | ≥ 485 | ≥ 485 |
| Yield Strength (MPa) | ≥ 205 | ≥ 275 | ≥ 275 |
| Elongation (%) (min) | 20 | 20 | 20 |
| Hardness (HB) (max) | 197 | 197 | 197 |
Notes:
Applications of A234 WP11-S 180° U-Bend
1. Power Plants
Used in boiler systems, steam lines, and heat exchangers due to its high-temperature resistance.
Suitable for thermal expansion loops to absorb pipe stress.
2. Oil & Gas Refineries
Employed in crude oil processing, petrochemical pipelines, and high-pressure gas lines where corrosion resistance is critical.
3. Chemical Processing Plants
Resists sulfur compounds, acidic, and alkaline environments (thanks to chromium-molybdenum alloy).
4. High-Temperature Steam Systems
Used in steam distribution networks (up to 593°C / 1100°F for WP11).
5. Heating & Cooling Systems
Functions in heat recovery systems, condensers, and district heating pipelines.
